Connect a standard garden hose to the water inlet. Ensure the water source is fully turned on before starting the motor to avoid damaging the pump seals.
Page 4 — Detergent use & advanced techniques rok power washer instructions
| Problem | Likely Cause | Solution | |--------|--------------|----------| | No pressure | Pump not primed | Fill intake line – squeeze trigger & pump slowly until water flows | | Pulsing spray | Air in system | Continue pumping with trigger open until stream is steady | | Hard to pump | Nozzle clogged or on zero spray | Remove nozzle, flush with clean water, or switch to wider pattern | | Water leaks from pedal | Worn seals (normal after heavy use) | Rebuild kit available from ROK | | Won’t draw water | Intake hose cracked or bucket too low | Keep intake submerged; hose must be air‑tight | Connect a standard garden hose to the water inlet
Before you start using your Rok Power Washer, it's essential to take some safety precautions to ensure a safe and enjoyable experience. : Most ROK electric models feature an auto-start/stop
: Most ROK electric models feature an auto-start/stop system; the motor will run briefly to pressurize and then shut off until you pull the trigger. 3. Usage Guidelines How to Start a Gas Powered Pressure Washer - Mi-T-M
With these instructions, you're ready to unleash the power of your Rok Power Washer! Remember to always follow safety precautions and use common sense when operating the machine. For more information, refer to your user manual or contact Rok customer support. Happy cleaning!