Sharp Lc-40le185m Service Mode -

button again. The TV should restart and open the Service Mode. Method 2: Standard Service Menu Access ("K" Mode) Use this for general adjustments or viewing system data. Power Down : Turn off the TV and unplug it. Vol- + Input Hold : Hold the buttons on the TV panel.

Press and hold both the and Volume Down (-) buttons on the TV panel. While holding these buttons, plug the power cord back in . sharp lc-40le185m service mode

: While still holding these buttons, plug the power cord back into the wall outlet. Wait for the "K" Indicator button again

: The Service Menu should now appear. Use the CH +/- buttons on the remote to move through the menu and VOL +/- to change values. Alternative Remote Codes (Method 2) Power Down : Turn off the TV and unplug it

(On some Sharp models, the final button is instead of ENTER. Try ENTER first, then if no response, repeat with DISPLAY.)

Service mode (engineering mode) provides advanced diagnostics, firmware info, panel and T-CON settings, and calibration options not available in the normal user menu. On Sharp LCD TVs it’s typically used to: