: Visit the official FNIRSI Support Page to find the latest version. The file is typically named FSI-1014.bin .
If your went disastrously wrong (no boot, no display, only a backlight), you need JTAG or UART recovery. This is advanced but possible.
: FNIRSI used different LCD manufacturers over time. If your screen shifts to the left or appears offset after an update, you likely used the wrong firmware variant. Simply load the alternative version of the FSI-1014.bin file provided in the firmware package to correct this. fnirsi1014d firmware update work
. The latest official release identified in user communities is Version 3.0 (dated October 2021). Core Update Requirements Firmware File: The device specifically looks for a file named FSI-1014.bin Hardware Interface:
To update the firmware on your , follow these steps to download and install the official software. The most recent version found is V3.0 (released around October 2021). Prerequisites : Visit the official FNIRSI Support Page to
: Copy the FSI-1014.bin file directly to the root of the oscilloscope's drive.
When done correctly, a firmware update can transform the 1014D from a sluggish, bug-prone scope into a responsive and reliable bench companion. When done carelessly, it can turn the device into an expensive paperweight. Follow the steps above, double-check your hardware revision, and you will master the update process with confidence. This is advanced but possible
The FNIRSI 1014D has undergone silent hardware revisions (e.g., different LCD drivers or mainboard chips). before updating. Some users have reported that firmware for the "V2.0" board will brick a "V1.3" board. If the official website does not clearly separate revisions, contact FNIRSI support directly with your serial number.