In the section, check the box for the specific LAN port you intend to connect to your personal router (e.g., LAN1 ). This tells the ZTE F689 to pass the raw internet signal directly through that physical port. 5. Disable DHCP and Wi-Fi To ensure the ZTE device doesn't interfere: Go to Local Network > LAN > DHCP Server and turn it Off .
This guide is provided for informational purposes. Firmware versions vary; menu names may differ slightly. When in doubt, contact your ISP for a bridge mode configuration file or support. Zte F689 Bridge Mode
The ZTE F689 is a versatile and widely used fiber-optic terminal device designed to facilitate high-speed internet connections. One of its key features is the ability to operate in Bridge Mode, a functionality that significantly enhances the device's utility and flexibility in various network configurations. This essay aims to provide an in-depth analysis of the ZTE F689 Bridge Mode, exploring its implications, benefits, and practical applications. In the section, check the box for the
The LAN1 port is now in pure bridge mode. Your external router must now perform the PPPoE dialing. Disable DHCP and Wi-Fi To ensure the ZTE
: Open a web browser and enter the default IP address, which is typically 192.168.1.1 or 192.168.0.1 .
The ZTE F689 is usually a GPON ONT (Optical Network Terminal) issued by an ISP. Bridge mode is often restricted or hidden. You will likely need the ONT super admin password (not the user password on the sticker). If you don’t have it, contact your ISP.