Videojet 1280 Manual Pdf Install [hot]

: Position the printhead at the optimal "throw distance" of 0.472” (12mm) from your product for the best print quality. Connecting Power and Data : Plug the power cable into the bottom/rear of the unit.

| Mistake | Consequence | Manual Solution (Page #) | | :--- | :--- | :--- | | | Ink dries on nozzle plate in high-humidity environments, causing deflection errors. | Install the optional air purge assembly (Section 3.4). | | Over-tightening printhead bolts | Distorts the printhead base, misaligning nozzle and gutter. | Use a torque wrench at 8 Nm (Page 3-12). | | Using wrong make-up bottle | Ink viscosity goes out of spec (target is 3.8 cP). | Flush entire system with cleaning fluid (Section 7.2). | | USB port contamination | Ink ingress into USB ports causes motherboard short. | Install the included rubber USB cover (Page 2-5). | videojet 1280 manual pdf install

The 1280 is not ATEX certified. Do not install in areas with airborne dust (grain, coal) or flammable gases. See NEC Class I, Division 2 guidelines. : Position the printhead at the optimal "throw

The dry, unpacked unit weighs approximately 39.5 lbs (17.9 kg) . | Install the optional air purge assembly (Section 3